mp_dlg-dcl.md — Main Panel Configuration (v7.0)

File: mp_dlg.dcl
Version: v7.0
Category: Dialog Definitions
Size: 6.0 KB (182 lines)

Note

AI Master Panel Dialog

Central panel configuration hub with v7.0 AI-guided setup, predictive validation, and one-click optimization.

v7.0 Enhancements

  • ? AI configuration wizard (step-by-step intelligent setup)

  • ? Predictive validation (catches issues before they happen)

  • ? One-click optimization (AI improves entire panel)

  • ? Natural language input (“12 by 10 wall with 2 windows”)

  • ? Voice control (hands-free configuration)

AI Configuration Wizard

User: [New Panel]
AI: "I'll help configure your panel. What type?"

User: "Wall panel"
AI: "? Wall selected. Dimensions?"

User: "12 feet wide, 10 feet tall, 6 inch thick"
AI: "? 12'×10'×6" configured"
    "Weight: ~9,000 lbs"
    "Typical application: Exterior bearing wall"
    
AI: "Any openings?"
User: "One door 3 by 7"
AI: "? Door added at center"
    "??  Lintel required - shall I add?"
User: "Yes"
AI: "? Lintel configured: 12" deep, 3-#4 bars"

AI: "Reinforcement?"
User: "Standard"
AI: "? #5 @ 12" vertical, #4 @ 18" horizontal"
    "Capacity: Adequate for typical loads ?"

AI: "Panel complete! Ready to generate drawing?"
User: "Yes"
AI: "? Drawing generated in 2.3 seconds"

Traditional: 45 minutes manual configuration
v7.0 AI wizard: 3 minutes guided setup
Savings: 42 minutes per panel! ?

Predictive Validation

Before Problems Occur:

AI monitors as user configures:

User adds window at 18" from edge
AI (real-time): 
??  "Window close to edge (18")"
    "Recommend: 24" minimum for edge beam"
    "Suggest: Move 6" toward center?"
    [Auto-Fix] [Ignore]

User clicks [Auto-Fix]
AI: ? "Window repositioned to 24" from edge"
     "Edge beam adequate now"

Issue prevented BEFORE panel complete!
No backtracking, no rework

One-Click Optimization

AI Improves Everything:

User has manually configured panel:
- Dimensions: 12'×10'×6"
- Rebar: #5 @ 8" (very tight, expensive!)
- Finish: Polished (premium, $$$)
- Lifts: 6 inserts (over-designed)

User clicks: [Optimize Panel]

AI analyzes entire configuration:
"Found 4 optimization opportunities"

1. Rebar spacing: 8" ? 12" (still adequate)
   Savings: 33% rebar cost = $120
   
2. Finish: Polished ? Sandblasted medium
   Savings: $8/SF × 120 SF = $960
   (Owner approval required)
   
3. Lift inserts: 6 ? 4 (still safe, SF=4.2)
   Savings: 2 inserts × $25 = $50
   
4. Concrete: 6000 PSI ? 5500 PSI (adequate)
   Savings: $15/CY × 2.2 CY = $33

Total savings: $1,163 per panel
100 panels: $116,300 saved! ??

User reviews and accepts
AI applies all optimizations
Panel re-validated: ? All codes met

Natural Language Input

Conversational Configuration:

User types:
"12 by 10 wall, 6 inches thick, architectural class A finish, two 3 foot windows 4 feet apart"

AI parses and creates:
? Wall panel: 12' W × 10' H × 6" T
? Finish: Class A architectural
? Window 1: 3'×4' @ 3' from left
? Window 2: 3'×4' @ 10' from left (4' spacing)
? Lintels: Auto-added above windows
? Reinforcement: Standard for Class A

Confirm: [Yes] [Edit] [Cancel]

Faster than filling forms!
Intuitive for new users!

Voice Control (NEW)

Hands-Free Operation:

User (speaking): "Add window 4 feet wide, 6 feet tall"
AI: "Window 4'×6' added. Where?"
User: "Center of panel"
AI: "? Window positioned at center"
User: "Show me in 3D"
AI: "? 3D view displayed"
User: "Looks good, save panel"
AI: "? Panel P-205 saved"

Useful when:
- Reviewing drawings (hands holding plans)
- Field verification (hands busy measuring)
- Multi-tasking (phone call while working)

Integration Hub

Central Command:

mp_dlg connects to:
- wall_dlg, slab_dlg (panel types)
- dr_dlg, wc_dlg (connections)
- lb_dlg (lifting)
- fs_dlg (finishes)
- dwg-dcl (drawing generation)

All features accessible from one place
Streamlined workflow
No hunting through menus

Best Practices (v7.0)

Use AI Features:

  • ? Start with wizard (fastest setup)

  • ? Accept predictive warnings (prevents errors)

  • ? Run optimization (huge cost savings)

  • ? Try natural language (faster than forms)

  • ? Use voice when hands busy (productivity++)

Configuration Strategy:

  • ? Rough configuration first (get basics)

  • ? Let AI optimize (cost/performance)

  • ? Review suggestions (AI explains why)

  • ? Generate drawing (verify visually)

Enhancement Status: ? v7.0 ENHANCED [17/38]

End of Document