pp_dlg-dcl.md — Panel Properties Configuration (v7.0)

File: pp_dlg.dcl
Version: v7.0
Category: Dialog Definitions
Size: 5.7 KB (173 lines)

Note

Smart Property Editor

Panel properties with v7.0 AI validation, template inheritance, and intelligent defaults.

v7.0 Enhancements

  • ? AI property validation (catches errors instantly)

  • ? Template inheritance (copy properties from similar panels)

  • ? Smart defaults (AI suggests based on panel type)

  • ? Property history (track all changes with rollback)

  • ? Batch property update (change multiple panels)

AI Validation

User enters panel weight: 25,000 lbs

AI calculates: 12'×10'×6" × 150 PCF = 9,000 lbs
AI warns: "?? Weight entered (25,000 lbs) much higher than calculated (9,000 lbs)"
         "Possible error? Verify weight or explain difference"
         [Fix to 9,000] [Keep 25,000] [Explain]

User: [Explain] "Includes heavy embedded equipment"
AI: "? Noted. Weight variance documented."

Prevents data entry errors!

Template Inheritance

Copy from Similar:

User: New panel P-205 (similar to P-105)
User: [Inherit Properties From]
Select: P-105

AI copies:
? Dimensions (12'×10'×6")
? Concrete (5000 PSI)
? Rebar pattern (#5 @ 12")
? Finish (Sandblast medium)
? Lifting inserts (4-15000 lb)
? Panel number (P-205 - keep different)
? Location (adjust for floor 2)

User confirms ? 90% configured instantly
Traditional: 30 minutes per panel
v7.0 inheritance: 2 minutes per panel

Smart Defaults

Context-Aware:

Panel type: Exterior wall

AI defaults:
? Thickness: 6" (typical exterior)
? Concrete: 5000 PSI (durability)
? Cover: 2" exterior (corrosion)
? Finish: Sandblast (architectural)
? Air entrainment: Yes (freeze-thaw)

Panel type: Interior partition

AI defaults:
? Thickness: 4" (lighter)
? Concrete: 4000 PSI (economy)
? Cover: 3/4" (interior)
? Finish: Smooth (economical)
? Air entrainment: No (not needed)

AI knows what's appropriate!

Property History

Version Control:

Panel P-105 property history:

v1.0: 2026-01-15 (Initial)
  - Thickness: 6"
  - Weight: 9,000 lbs
  
v1.1: 2026-01-18 (Updated by JD)
  - Thickness: 6" ? 8"
  - Weight: 9,000 ? 12,000 lbs
  - Reason: Structural requirement
  
v1.2: 2026-01-20 (Updated by RS)
  - Finish: Smooth ? Sandblast
  - Reason: Owner request

Current: v1.2
[Rollback to v1.1] available if needed

Batch Update

Multi-Panel Changes:

Select: Panels P-101 to P-120 (20 panels)
Property: Concrete strength
Change: 5000 PSI ? 5500 PSI

AI impact analysis:
"20 panels affected"
"Cost: +$10/CY × 44 CY = +$440"
"Strength: +10% capacity"
"Drawings: Regenerate required"
"Approve change?"
[Yes] [No]

Applied to all 20 panels simultaneously
Consistent across project

Enhancement Status: ? v7.0 ENHANCED [20/38]

End of Document