wc_edit-dcl.md — Weld Connection Edit (v7.0)¶

File: wc_edit.dcl
Version: v7.0
Category: Dialog Definitions
Size: 5.6 KB (170 lines)

Note

AI Weld Editor

Quick weld editing with v7.0 AI suggestions, batch update, and real-time validation.

v7.0 Enhancements¶

? AI edit suggestions (optimal modifications)
? Batch weld update (change multiple simultaneously)
? Real-time validation (capacity checked as you type)
? Change history (track all modifications)
? 3D edit preview (see changes before applying)

AI Edit Suggestions¶

User edits weld WC-12:
Current: 3/16" fillet weld

AI analyzes connection:
"Load: 8 kips"
"Current capacity: 59 kips (SF = 7.4)"
"Suggestion: Reduce to 1/8" weld"
"New capacity: 39 kips (SF = 4.9) ? Still adequate"
"Savings: $12/weld × 50 similar = $600"

[Apply Suggestion] [Keep 3/16"]

AI finds optimization opportunities!

Batch Weld Update¶

Multi-Weld Changes:

Select welds: WC-01 to WC-20 (20 welds)
Change: 3/16" ? 1/4"

AI impact analysis:
"20 welds affected"
"Capacity increase: 33%"
"Cost increase: +$240 total"
"All welds still AWS compliant ?"
"Fabrication time: +2 hours"

[Apply to All] [Cancel]

Consistent modifications across project

Real-Time Validation¶

Live Capacity Checks:

User typing new weld size: 1/8"

AI calculates (live):
"Capacity: 39 kips"
"Applied load: 8 kips"
"Safety factor: 4.9" ?

Changes to 3/32":
"Capacity: 29 kips"
"Applied load: 8 kips"
"Safety factor: 3.6" ?? Marginal

Changes to 1/16":
"Capacity: 20 kips"
"Applied load: 8 kips"
"Safety factor: 2.5" ? Below minimum 4.0

Instant feedback prevents errors!

Change History¶

Weld Modification Log:

Weld WC-12 history:

v1.0: 2026-01-20 - Initial: 3/16" fillet
v1.1: 2026-01-22 - Increased to 1/4" (Engineer RS)
      Reason: "Higher loads from design revision"
v1.2: 2026-01-25 - Reduced to 3/16" (Designer JD)
      Reason: "Loads corrected, 3/16" adequate"

Current: v1.2 (3/16" fillet weld)
Can rollback to v1.1 if needed

3D Edit Preview¶

Before/After Visualization:

Split-screen 3D view:

Left: Current weld (3/16")
Right: Proposed weld (1/4")

Visual comparison:
- Bead size difference
- Capacity change
- Cost impact

User sees exactly what changes
Accept or reject before applying

Smart Copy¶

Duplicate Weld Properties:

User: Copy properties from WC-12
Select target welds: WC-13, WC-14, WC-15

AI copies:
? Weld size (3/16")
? Weld type (fillet)
? Inspection (visual)
? Position (keep different per location)

Applied to 3 welds instantly
Ensures consistency

Enhancement Status: ? v7.0 ENHANCED [37/38]

End of Document